Kia 2020 Telluride Owner's Manual page 397

Driving your vehicle
is located. Remove any dirt, snow,
or foreign material that could inter-
fere with the radar sensors.
After any dirt or debris is removed,
the BCA should operate normally
after about 10 minutes of driving
the vehicle.
If you use BCW and BCA system,
remove a trailer or carrier.
If the BCW/BCA still does not oper-
ate normally, have your vehicle
inspected by an authorized Kia
dealer.
NOTICE
Turn off the BCW and BCA system
when a trailer or carrier is installed.
1. Press the BCW/BCA button (the
indicator on the button extin-
guish)
2. Press the MODE button (
eral times on the steering wheel
until 'User Settings' menu appears
on the LCD.
3. Deactivate by deselecting 'Driver
Assistance → Parking safety →
Rear Cross-Traffic Safe' with the
MOVE switch (
OK button on the steering wheel.
) sev-
/ ) and the
Blind-Spot Collision Warning (BCW)/Blind-Spot
Collision-Avoidance Assist (BCA) system
Check Blind-Spot Collision Warning
(BCW) system
OON058108NR
If there is a problem with the BCW, a
warning message will appear and
the light on the switch will turn off.
The BCW will turn off automatically.
The BCA will not operate also if the
BCW turns off due to malfunction. In
this case, have your vehicle
inspected by an authorized Kia
dealer.
Check Blind-Spot Collision-Avoid
ance Assist (BCA) system
OON058109NR
5
-
5 119