Kia 2020 Telluride Owner's Manual page 290

Driving your vehicle
CAUTION
If the engine stalls while the vehicle
is in motion, do not attempt to
move the shift lever to the P (Park)
position. If the traffic and road con-
ditions permit, you may put the
shift lever in the N (Neutral) position
while the vehicle is still moving and
press the ENGINE START/STOP but-
ton in an attempt to restart the
engine.
OON058004NR
NOTICE
If the battery is weak or the
smart key does not work cor-
rectly, you can start the engine by
pressing the ENGINE START/STOP
button with the smart key.
When you press the ENGINE
START/STOP button directly with
the smart key, the smart key
should contact the button at a
right angle.
5 12
ENGINE START/STOP button
When the stop lamp fuse is blown,
you cannot start the engine nor-
mally.
Replace the fuse with a new one.
If it is not possible, you can start
the engine by pressing the engine
start/ stop button for 10 seconds
while it is in the ACC position. The
engine can start without pressing
the brake pedal. But for your
safety always press the brake
pedal before starting the engine.
CAUTION
Do not press the ENGINE START/
STOP button for more than 10 sec-
onds except when the stop lamp
fuse is blown.