Kia 2020 Telluride Owner's Manual page 338

Driving your vehicle
cle in front, insufficient braking dis-
tance, pedestrian or cyclist
detection. Also, it controls the
brakes in accordance with the colli-
sion risk levels.
The driver can select the initial
warning activation time in the User
Settings in the LCD display. The
options for the initial Forward Colli-
sion Warning include Normal or
Later initial warning time.
Collision Warning (1st warning)
OON058079NR
The warning message appears on
the LCD display with a warning
chime.
Additionally, some vehicle system
intervention occurs by the engine
management system to help decel-
erate the vehicle.
The Vehicle may slow down slightly.
The FCA system will operate if
the vehicle speed is greater than 5
mph (8 km/h) and less than or
equal to 100 mph (160 km/h) on a
5 60
Forward Collision-Avoidance Assist (FCA) Sensor
fusion type (front Camera + front radar type)
forward vehicle. (Depending on
the condition of the vehicle ahead
and the environment surrounding
it, the possible maximum operat-
ing speed may be reduced.)
For pedestrians and cyclists to be
detected, the vehicle speed must
be greater than or equal to 5 mph
(8 km/h) and less than 55 mph
(90 km/h). (Depending on the
condition of pedestrians and bike
riders and the surrounding envi-
ronment the possible maximum
operating speed may be reduced.)
- If you select "Warning only", the
FCA activates and produces
only warning alarms in accor-
dance with the collision risk lev-
els. You must control the brake
directly because the FCA in this
setting does not control the
brake.
Emergency braking (2nd warning)
OON058080NR
The warning message appears on
the LCD display with the a warning
chime.
system