Table of Contents
Advertisement
Driving your vehicle
OON058047NR
[A]: Warning sound
A warning chime to alert the driver
will activate when:
A vehicle has been detected in the
blind spot area by the radar sys-
tem AND.
The turn signal is applied (same
side as where the vehicle is being
detected).
When this alert is activated, the
warning light on the outside rear-
view mirror and the Head-Up Dis-
play (if equipped) will also blink. And
a warning chime will sound.
If you turn off the turn signal indi-
cator, the second stage alert will be
deactivated.
Once the detected vehicle is no lon-
ger within the blind spot area, the
warning will turn off according to
the driving conditions of the vehicle.
Blind-Spot Collision Warning (BCW)/Blind-Spot
Collision-Avoidance Assist (BCA) system
WARNING
The warning light on the outside
rearview mirror will illuminate
whenever a vehicle is detected at
the rear side by the system.
To avoid accidents, do not focus
only on the warning light and
neglect to see the surrounding of
the vehicle.
Drive safely even though the
vehicle is equipped with a Blind-
Spot Collision Warning (BCW) sys-
tem. Do not solely rely on the
system but check your surround-
ing before changing lanes or back-
ing the vehicle up.
The system may not alert the
driver in some conditions so
always check your surroundings
while driving.
The driver should always use
extreme caution while operating
the vehicle, whether or not the
warning light on the outside rear-
view mirror illuminates or there is
a warning alarm.
CAUTION
Playing the vehicle audio system
at high volume may offset the
Blind-Spot Collision Warning sys-
tem warning sounds.
The warning of the Blind-Spot
Collision Warning system may not
sound while other system's warn-
ing sounds.
5
5
115
Advertisement
Chapters
Table of Contents
