Kia 2020 Telluride Owner's Manual page 158

Features of your vehicle
OON048401NR
1)Flashing
NOTICE
For non-rolling code garage door
openers, follow steps 2-3.
For rolling code garage door open-
ers, follow steps 2-6.
For Canadian Programming, please
follow the Canadian Programming
section. For help with determining
whether your garage door opener is
non-rolling code or rolling code,
please refer to the garage door
openers owner's manual or contact
HomeLink customer service at 1-
800-355-3515.
2. Press and hold the button on the
HomeLink system you wish to
train and the button on the trans-
mitter while the transmitter is
approximately 1~3 in (2~8 cm)
away from the mirror. Do not
release the buttons until step 3
has been completed.
4 58
OON048402NR
1)Flashing
2)Transmitter
3. The HomeLink indicator light will
flash, first slowly and then rap-
idly. When the indicator light
flashes rapidly, both buttons may
be released. (The rapid flashing
light indicates successful pro-
gramming of the new frequency
signal.)
NOTICE
Some gate and garage door openers
may require you to replace step 3
with the "cycling" procedure noted
in the "Canadian Programming" sec-
tion of this document.
Programming rolling code
To train a garage door opener (or
other rolling code equipped devices)
with the rolling code feature, follow
these instructions after completing
"Programming HomeLink" on page
4-57. (A second person assisting
Mirrors