Kia 2020 Telluride Owner's Manual page 307

Driving your vehicle
Releasing the parking brake.
Shifting the transmission out of P
(Park) position.
Starting the engine. In addition,
they may operate vehicle equip-
ment.
Never leave children and animals
unattended in the vehicle.
When leaving the vehicle, always
take the smart key with you and
lock the vehicle.
NOTICE
On a steep incline or when pulling a
trailer, if the vehicle does not remain
at a standstill, do as follows:
1. Apply the EPB.
2. Pull up the EPB switch for more
than 3 seconds.
Do not operate the EPB while the
vehicle is moving except in an emer-
gency situation.
NOTICE
A click or electric brake motor whine
sound may be heard while operating
or releasing the EPB.
These conditions are normal and
indicate that the EPB is functioning
properly.
Releasing the EPB with EPB switch
OON058014NR
Releasing the parking brake with
EPB switch,
1. Have the ENGINE START/STOP
button in the ON position.
2. Press the brake pedal.
3. The shift lever must be in P
(Park).
4. Make sure the brake warning light
goes off.
Automatic release of EPB
The EPB is released automatically
under following conditions.
Shift lever in P (Park)
With the engine running engage
the brake pedal and shift out of P
(Park) to R (Reverse) or D (Drive).
Shift lever in N (Neutral)
With the engine running engage
the brake pedal and shift out of N
(Neutral) to R (Reverse) or D
(Drive).
Automatic transmission
1. Start the engine.
2. Fasten the driver's seat belt.
Brake system
5
5 29