Kia 2020 Telluride Owner's Manual page 185

Hide thumbs Also See for 2020 Telluride:
Table of Contents

Advertisement

Features of your vehicle
and battery discharge problems
may occur.
If the warning continues even after
external electrical devices are
removed, have your vehicle
inspected by an authorized Kia
dealer.
Press START button again for
smart key system
This warning message illuminates if
you cannot operate the ENGINE
START/STOP button when there is a
problem with the ENGINE START/
STOP button system.
It means that you could start the
engine by pressing the ENGINE
START/STOP button once more.
If the warning illuminates each time
you press the ENGINE START/STOP
button, have the vehicle inspected
by an authorized Kia dealer.
Press START button with key for
smart key system
This warning message illuminates if
you press the ENGINE START/STOP
button while the warning message
"Key not detected" is illuminating.
At this time, the immobilizer indica-
tor light blinks.
Check DAW system (if equipped)
This warning message is displayed if
there is a problem with the Driver
Attention Warning system. In this
case, have the vehicle inspected by
an authorized Kia dealer.
* For more information, refer to
"Driver Attention Warning (DAW)
system" on page 5-108.
Check BCW system (if equipped)
This warning message is displayed if
there is a problem with the Blind-
spot Collision Warning (BCW) sys-
tem. In this case, have the vehicle
inspected by an authorized Kia
dealer.
* For more information, refer to
"Blind-Spot Collision Warning
(BCW)" on page 5-111.
Icy Road Warning (if equipped)
OON048123NR
This warning is to warn the driver
the road may be icy.
LCD displays
4
4
85

Advertisement

Table of Contents
loading

Table of Contents