Table of Contents
Advertisement
Driving your vehicle
When coming to a complete stop by
pressing the brake pedal, the AUTO
HOLD indicator changes from white
to green indicating the AUTO HOLD
is engaged. The vehicle will remain
at a standstill even if you release
the brake pedal.
OON058016NR
If EPB is applied, Auto Hold will be
released.
If you press the accelerator pedal
with the shift lever in D (Drive) or
Manual mode, the Auto Hold will be
released automatically and the vehi-
cle will start to move. The indicator
changes from green to white indi-
cating the Auto Hold is in standby
and the EPB is released.
When driving off from Auto Hold by
pressing the accelerator pedal,
always check the surrounding area
near your vehicle.
Slowly press the accelerator pedal
for a smooth launch.
5
34
Canceling Auto Hold function
OON058015NR
To cancel the Auto Hold operation,
press the Auto Hold switch. The
AUTO HOLD indicator will go out.
To cancel the Auto Hold operation
when the vehicle is at a standstill,
press the Auto Hold switch while
pressing the brake pedal.
NOTICE
The following are conditions when
the Auto Hold will not engage
(Auto Hold light will not turn
green and the Auto Hold system
remains in stand by):
- The driver's door is opened
- The engine hood or liftgate is
opened
- The shift lever is in P (Park)
- The EPB is applied
For your safety, the Auto Hold
automatically switches to EPB
under any of the following condi-
tions (Auto Hold light remains
white and the EPB automatically
applies):
- The driver's door is opened.
Brake system
Advertisement
Chapters
Table of Contents
