Kia 2020 Telluride Owner's Manual page 38

Safety features of your vehicle
settings mode in the instrument
cluster.
1. Press the MODE button (
eral times on the steering wheel
until 'User Settings' menu appears
on the LCD.
2. Select 'Convenience → Seat Easy
Access → OFF/Normal/Extend'
and 'Convenience → Seat upward/
downward' with the MOVE switch
( / ) and the OK button on
the steering wheel.
It will move the driver's seat rear-
ward when the ENGINE START/
STOP button is changed to the
OFF position.
It will move the driver's seat for-
ward when the ENGINE START/
STOP button is changed to the
ACC or START position and front
driver's door is opened.
It will move the driver's seat for-
ward and upward when the
ENGINE START/STOP button is in
ON. It will move the driver's seat
backward and downward when
the ENGINE START/STOP button
is in OFF.
You can activate or deactivate this
feature. Refer to "User Settings
mode" on page 4-71.
3 14
NOTICE
Upward/downward movement of
) sev-
the seat may not work when pas-
sengers get on/off the vehicle in
order to prevent foot injuries in cer-
tain places.
Resetting the driver position mem
ory system
If the driver position memory sys-
tem reset fails to work, initialize the
system as follows.
How to initialize:
1. Stop the car and open the driver's
door with the ENGINE START/
STOP button in ON and the auto-
matic shift lever in P (parking)
position.
2. Pull the driver's seat forward as
far as possible and have the seat-
back upright as much as possible
using driver's seat forward/back-
ward adjustment and seatback
angle (recline) movement
switches.
3. Push SET button and seat for-
ward movement switch button
for 2 seconds simultaneously.
Initialization in the process:
1. Initialization begins as the alarm
sounds.
2. The seat and seatback will auto-
matically move backwards. The
alarm sound will continue while
the system is in operation.
Seat
-