Kia 2020 Telluride Owner's Manual page 245

Features of your vehicle
Adjusting the driver and passenger
side temperature, fan speed and
air flow direction individually
Press the "SYNC" button again to
adjust the driver and front/rear
passenger side temperature, fan
speed and air flow direction indi-
vidually.
Changing temperature scale
You can switch the temperature
mode from Centigrade to Fahren-
heit as follows:
While pressing the OFF button,
press the AUTO button for 3 sec-
onds or more.
The display will change from Centi-
grade to Fahrenheit, or from Fahr-
enheit to Centigrade. If the battery
has been discharged or discon-
nected, the temperature mode dis-
play will reset to Fahrenheit.
Controlling air intake
This is used to select the outside
(fresh) air position or recirculated air
position.
OON048321NR
Automatic climate control system
To change the air intake control
position:
Push the desired control button.
Outside (fresh) air position
With the outside (fresh) air
position selected, air
enters the vehicle from
outside and is heated or cooled
according to the function selected.
Recirculated air position
With the recirculated air
position selected, air from
the passenger compart-
ment will be drawn through the
heating system and heated or
cooled according to the function
selected.
Prolonged operation of the heater in
the recirculated air position (without
air conditioning selected) may cause
fogging of the windshield and side
windows and make the air in the
passenger compartment stale.
In addition, prolonged use of the air
conditioning with the recirculated air
position selected will result in
excessively dry air in the passenger
compartment.
Controlling fan speed
The fan speed can be set to the
desired speed by operating the fan
speed control button.
To change the fan speed:
Press button right for higher
speed, or press button left for
lower speed.
4
4 145