Kia 2020 Telluride Owner's Manual page 216

Features of your vehicle
- When there is a traffic light,
reflecting sign, flashing sign or
mirror ahead.
- When there is a temporary
reflector or flash ahead (con-
struction area).
- When the road conditions are
poor such as being wet, iced or
covered with snow.
- When a vehicle suddenly
appears from a curve.
- When the vehicle is tilted from
a flat tire or being towed.
- When the Lane Keeping Assist
(LKA) system failure indicator
(yellow) illuminates.
When front visibility is poor
- When the lamp of the on-com-
ing or front vehicle is covered
with dust, snow or water.
- When the light from a on-com-
ing or front vehicle is not
detected because of exhaust
fume, smoke, fog, snow, etc.
- When the front window is cov-
ered with foreign substance.
- When it is hard to see because
of fog, heavy rain or snow and
etc.
4 116
NOTICE
Do not disassemble a front view
camera temporarily for tinted
window or attaching any types of
coatings and accessories. If you
disassemble the camera and
assemble it again, take your vehi-
cle to an authorized Kia dealer
and have the system checked.
When you replace or reinstall the
windshield glass take your vehicle
to an authorized Kia dealer and
have the system checked.
Be careful that water doesn't get
into the High Beam Assist unit
and do not remove or damage
parts of the High Beam Assist
system.
Do not place objects on the dash
board that reflect light such as
mirrors, white paper, etc. The
system may not be able to func-
tion if sunlight is reflected onto it.
At times, the High Beam Assist
may not operate due to system
limitations. The system is for
your convenience only.
It is the responsibility of the driver
to drive safely and always check
the road conditions.
When the system does not oper-
ate normally, change the lamp
position manually between the
high beam and low beam.
Lighting