Kia 2020 Telluride Owner's Manual page 522

Hide thumbs Also See for 2020 Telluride:
Table of Contents

Advertisement

Maintenance
However, if the lamp continues to
flicker several times or turns off
completely, there may be an error
in the vehicle's electronic control
device. Please have the vehicle
checked by an authorized Kia
dealer immediately.
NOTICE
We recommend that the headlight
aiming be adjusted by an authorized
Kia dealer after an accident or after
the headlight assembly is rein-
stalled.
NOTICE
After driving in heavy rain or wash-
ing, headlamp and taillamp lenses
could appear frosty. This condition
is caused by the temperature dif-
ference between the lamp inside
and outside. This is similar to the
condensation on your windows
inside your vehicle during the rain
and doesn't indicate a problem with
your vehicle. If the water leaks into
the lamp bulb circuitry, we recom-
mend that you have the vehicle
checked by an authorized Kia dealer.
If you don't have the necessary
tools, the correct bulbs and the
expertise, consult an authorized Kia
dealer. In many cases, it is difficult
to replace vehicle light bulbs
7
60
because other parts of the vehicle
must be removed before you can
get to the bulb. This is especially
true if you have to remove the
headlamp assembly to get to the
bulb(s).
Removing/installing the headlamp
assembly can result in damage to
the vehicle. If non-genuine parts or
substandard bulbs are used, it may
lead to blowing a fuse or other wir-
ing damages.
Do not install extra lamps or LEDs to
the vehicle. If additional lights are
installed, it may lead to lamp mal-
functions and flickering. Addition-
ally, the fuse box and other writing
may be damaged.
Light bulb position (Front)
Headlamp Type A
OON078033NR
Light bulbs

Advertisement

Table of Contents
loading

Table of Contents