Enable Or Disable Operator Actions From The Display; Enable Or Disable Totalizer Start/Stop From The Display - Emerson Micro Motion 2700 Configuration And Use Manual

Configure device options and preferences
5.2 Enable or disable operator actions from the
display
You can configure the transmitter to let the operator perform specific actions using the
display.
•
•
•
5.2.1

Enable or disable Totalizer Start/Stop from the display

Display
ProLink III
Field Communicator Configure > Manual Setup > Display > Display Variable Menu Features > Start/Stop Total-
Overview
You can control whether or not the operator is able to start and stop totalizers and
inventories from the display.
Restrictions
•
•
•
Procedure
1.
2.
72
Enable or disable Totalizer Start/Stop from the display
Enable or disable Totalizer Reset from the display
Enable or disable the Acknowledge All Alerts display command
OFF-LINE MAINT > OFF-LINE CONFG > DISPLAY > TOTALS STOP
Device Tools > Configuration > Totalizer Control Methods
izers
You cannot start and stop totalizers individually from the display. All totalizers are started or
stopped together.
You cannot start or stop inventories separately from totalizers. When a totalizer is started or
stopped, the associated inventory is also started or stopped.
If the petroleum measurement application is installed, the operator must enter the off-line
password to perform this function, even if the off-line password is not enabled.
Ensure that at least one totalizer is configured as a display variable.
Enable or disable Totalizer Reset as desired.
Option Description
Enabled
Operators can start and stop totalizers and inventories from the display,
if at least one totalizer is configured as a display variable.
Disabled (default) Operators cannot start and stop totalizers and inventories from the dis-
play.
Micro Motion Model 2700 Transmitters with Intrinsically Safe Outputs
(Section 5.2.1)
(Section 5.2.2)
(Section 5.2.3)