Configure Descriptor; Configure Message - Emerson Micro Motion 2700 Configuration And Use Manual

Overview
Sensor Flange Type lets you store your sensor's flange type in transmitter memory. This
parameter is not used in processing and is not required.
Procedure
1.
2.
5.6.5

Configure Descriptor

Display
ProLink III
Field Communicator Configure > Manual Setup > Info Parameters > Transmitter Info > Descriptor
Overview
Descriptor lets you store a description in transmitter memory. The description is not used
in processing and is not required.
Procedure
Enter a description for the transmitter or device
You can use up to 16 characters for the description.
5.6.6

Configure Message

Display
ProLink III
Field Communicator Configure > Manual Setup > Info Parameters > Transmitter Info > Message
Overview
Message lets you store a short message in transmitter memory. This parameter is not used
in processing and is not required.
Procedure
Enter a short message for the transmitter or device.
Your message can be up to 32 characters long.
Configuration and Use Manual
Obtain your sensor's flange type from the documents shipped with your sensor, or
from a code in the sensor model number.
To interpret the model number, refer to the product data sheet for your sensor.
Set Sensor Flange Type to the appropriate option.
Not available
Device Tools > Configuration > Informational Parameters > Transmitter
Not available
Device Tools > Configuration > Informational Parameters > Transmitter
Configure device options and preferences
85