Router Mode: Manage Vpn Pass-Through - NETGEAR WAC124 User Manual

AC2000 802.11ac Wireless Access Point/Router WAC124
The WAN Setup page displays.
6. To disable the SIP ALG, select the Disable SIP ALG check box.
The SIP ALG is enabled by default.
7. Click the Apply button.
Your settings are saved.

Router mode: Manage VPN pass-through

VPN pass-through allows a computer on the local area network (LAN) to receive VPN
traffic from the Internet over an IPSec, PPTP, or L2TP connection. Under normal
circumstances, leave VPN pass-through enabled, which is the default setting. If you
disable VPN pass-through, VPN traffic is blocked.
To disable VPN pass-through:
1. Open a web browser from a computer or mobile device that is connected to the
access point/router network.
2. Enter http://www.routerlogin.net in the address field.
If you are not connected to the access point/router network but to the same network
as the access point/router, enter the IP address that is assigned to the access
point/router. If you do not know the IP address, see Find the IP address of the access
point/router on page 29.
The Sign-In page displays. You are prompted to sign in with your NETGEAR account.
If the access point/router is not connected to the Internet, you are prompted to sign
in with the local login credentials (see Log in to the access point/router when it is
not connected to the Internet on page 28).
3. Click the Login button.
The NETGEAR Account Login page displays.
4. Enter your registered email address and password and click the LOG IN button.
The BASIC Home page displays.
5. Select ADVANCED > Setup > WAN Setup.
The WAN Setup page displays.
6. In the VPN Passthrough section, select one or more Disabled radio buttons.
By default, the Enable radio buttons are selected and VPN pass-through is enabled
for IPSec, PPTP, and L2TP.
7. Click the Apply button.
Manage the Firewall and
Security
80 User Manual