NETGEAR WAC124 User Manual page 4

AC2000 802.11ac Wireless Access Point/Router WAC124
Router mode: Manually set up the access point/router Internet
connection...........................................................................................40
Router mode: Specify a dynamic or fixed WAN IP address Internet
connection without a login...........................................................40
Router mode: Specify a PPPoE Internet connection that uses a
login.................................................................................................42
Router mode: Specify a PPTP or L2TP Internet connection that
uses a login.....................................................................................44
Router mode: Specify an IPv6 Internet connection........................46
Router mode: Requirements for entering IPv6 addresses.......47
Router mode: Use Auto Detect for an IPv6 Internet
connection......................................................................................47
Router mode: Use Auto Config for an IPv6 Internet
connection......................................................................................49
Router mode: Set up an IPv6 6to4 tunnel Internet connection.51
Router mode: Set up an IPv6 6rd Internet connection..............52
Router mode: Set up an IPv6 passthrough Internet
connection......................................................................................54
Router mode: Set up an IPv6 fixed Internet connection...........55
Router mode: Set up an IPv6 DHCP Internet connection.........57
Router mode: Set up an IPv6 PPPoE Internet connection........58
Chapter 4 Manage the Basic WiFi and Radio Features
Set up or change an open or secure WiFi network........................62
Configure WPA and WPA2 Enterprise WiFi security.....................65
Disable or enable a WiFi network....................................................67
Hide or broadcast the SSID for a WiFi network..............................68
Enable or disable the WiFi radios.....................................................69
Use WPS to add a device to the WiFi network................................70
Use WPS with the push button method......................................70
Use WPS with the PIN method.....................................................72
Chapter 5 Manage the Firewall and Security
Router mode: Manage the basic firewall settings..........................75
Router mode: Manage port scan protection and denial of service
protection........................................................................................75
Router mode: Set up a default DMZ server................................76
Router mode: Manage IGMP proxying.......................................77
Router mode: Manage NAT filtering...........................................78
Router mode: Manage the SIP application-level gateway........79
Router mode: Manage VPN pass-through..................................80
Allow or block device access to your network................................81
Enable and manage network access control..............................81
Manage network access control lists...........................................82
4