View, Send, Or Clear The Logs - NETGEAR WAC124 User Manual

AC2000 802.11ac Wireless Access Point/Router WAC124
The BASIC Home page displays.
5. Select ADVANCED > Administration > Logs.
The Logs page displays.
6. Select the check boxes that correspond to the activities that you want to be logged.
By default, all check boxes are selected, and the following activities are logged:
• Attempted access to allowed sites
• Attempted access to blocked sites and services
• Connections to the local browser interface of the access point/router
• Access point/router operations such as startup, getting the time, and so on
• Known DoS attacks and port scans
• Port forwarding and port triggering
• WiFi access
• ReadySHARE access
• VPN service
7. Clear the check boxes that correspond to the activities that you do not want to be
logged.
8. Click the Apply button.
Your settings are saved.

View, send, or clear the logs

In addition to viewing the logs, you can send them by email, and clear them.
To view, send, or clear the logs:
1. Open a web browser from a computer or mobile device that is connected to the
access point/router network.
2. Enter http://www.routerlogin.net in the address field.
If you are not connected to the access point/router network but to the same network
as the access point/router, enter the IP address that is assigned to the access
point/router. If you do not know the IP address, see Find the IP address of the access
point/router on page 29.
The Sign-In page displays. You are prompted to sign in with your NETGEAR account.
Maintain and Monitor the Access
Point/Router
143 User Manual