Router Mode: Set Up An Ipv6 Dhcp Internet Connection - NETGEAR WAC124 User Manual

AC2000 802.11ac Wireless Access Point/Router WAC124

Router mode: Set up an IPv6 DHCP Internet connection

To set up an IPv6 Internet connection with a DHCP server:
1. Open a web browser from a computer or mobile device that is connected to the
access point/router network.
2. Enter http://www.routerlogin.net in the address field.
If you are not connected to the access point/router network but to the same network
as the access point/router, enter the IP address that is assigned to the access
point/router. If you do not know the IP address, see Find the IP address of the access
point/router on page 29.
The Sign-In page displays. You are prompted to sign in with your NETGEAR account.
If the access point/router is not connected to the Internet, you are prompted to sign
in with the local login credentials (see Log in to the access point/router when it is
not connected to the Internet on page 28).
3. Click the Login button.
The NETGEAR Account Login page displays.
4. Enter your registered email address and password and click the LOG IN button.
The BASIC Home page displays.
5. Select ADVANCED > Advanced Setup > IPv6.
The IPv6 page displays.
6. From the Internet Connection Type menu, select DHCP.
The page adjusts. The access point/router automatically detects the information in
the following fields:
• Router's IPv6 Address on WAN. This field shows the IPv6 address that is acquired
for the access point/router's WAN (or Internet) interface. The number after the
slash (/) is the length of the prefix, which is also indicated by the underline (_)
under the IPv6 address. If no address is acquired, the field displays Not Available.
• Router's IPv6 Address on LAN. This field shows the IPv6 address that is acquired
for the access point/router's LAN interface. The number after the slash (/) is the
length of the prefix, which is also indicated by the underline (_) under the IPv6
address. If no address is acquired, the field displays Not Available.
7. (Optional) In the DHCP User Class (If Required) field, enter a host name.
Most people can leave this field blank, but if your ISP gave you a specific host name,
enter it here.
8. (Optional) In the DHCP Domain Name (If Required) field, enter a domain name.
Specify the Access Point/Router
Internet Settings Manually
57 User Manual