NETGEAR WAC124 User Manual page 145

AC2000 802.11ac Wireless Access Point/Router WAC124
point/router. If you do not know the IP address, see Find the IP address of the access
point/router on page 29.
The Sign-In page displays. You are prompted to sign in with your NETGEAR account.
If the access point/router is not connected to the Internet, you are prompted to sign
in with the local login credentials (see Log in to the access point/router when it is
not connected to the Internet on page 28).
3. Click the Login button.
The NETGEAR Account Login page displays.
4. Enter your registered email address and password and click the LOG IN button.
The BASIC Home page displays.
5. Select ADVANCED.
The ADVANCED Home page displays.
The information in the heading of each of the four panes uses the following color
coding:
• Green flag. The settings are fine and no problems exist. For a radio, the WiFi
network is enabled and secured.
• Red X. A problem exists or the connection is down. For a radio, the WiFi network
is disabled or down.
• Orange exclamation mark. The access point/router cannot get an Internet
connection (for example, because a cable is disconnected), the WiFi network of
a radio is enabled but open (that is, it is unprotected), or another situation
occurred and requires your attention.
The following tables describe the fields of the panes.
Field
AP information pane
Hardware Version
Firmware Version
GUI Language Version
Maintain and Monitor the Access
Point/Router
Description
The access point/router hardware version, which is the model number WAC124.
The access point/router firmware version. If you update the firmware, the version
changes (see Update the firmware of the access point/router on page 132).
The access point/router language version for the local browser interface.
145 User Manual