NETGEAR WAC124 User Manual page 149

AC2000 802.11ac Wireless Access Point/Router WAC124
(Continued)
Field
IP Address
DHCP Server
Field
Internet Port pane
To change these settings, see, Use the Internet Setup Wizard on page 38 or Router mode: Manually set up the
access point/router Internet connection on page 40.
MAC Address
IP Address
Connection
IP Subnet Mask
Domain Name Server
Field
Wireless Settings (2.4GHz) or Wireless Settings (5GHz )
To change these settings, see Manage the Basic WiFi and Radio Features on page 61 and Manage the Advanced
WiFi and Radio Features on page 209.
Region
Channel
Mode
Wireless AP
Maintain and Monitor the Access
Point/Router
Description
The IP address that applies to all four access point/router LAN ports through which
you can access the access point/router.
If the access point/router is in router mode, whether the DHCP server of the access
point/router is enabled (the default setting in router mode) or disabled (see Router
mode: Disable the DHCP server on page 116).
Description
The MAC address that applies to the access point/router WAN (Internet) port.
The WAN IP address that the access point/router receives from your Internet
modem or ISP or the WAN IP address that you manually configured.
The type of Internet connection that the access point/router uses, which can be
DHCP Client (the default setting), FixedIP, PPPoE, PPTP, or L2TP.
The IP subnet mask that the access point/router uses.
The IP address of the Domain Name System (DNS) server that the access
point/router uses.
Description
The country and region in which the access point/router is being used (see Set up
or change an open or secure WiFi network on page 62).
The channel that the radio uses (see Change the channel for a radio on page 211).
The WiFi throughput mode that the radio uses (see Change the WiFi throughput
mode for a radio band on page 212).
Whether the virtual access point (VAP) of the default WiFi network (Wireless 1) is
enabled or disabled (see Disable or enable a WiFi network on page 67).
149 User Manual