Manage Uplink Bandwidth Control - NETGEAR WAC124 User Manual

AC2000 802.11ac Wireless Access Point/Router WAC124
The NETGEAR Account Login page displays.
4. Enter your registered email address and password and click the LOG IN button.
The BASIC Home page displays.
5. Select ADVANCED > Setup > QoS Setup.
The QoS Setup page displays.
Warning: If you click the Delete All button, all default and custom QoS rules are
permanently removed.
6. Click the Delete All button.
All QoS rules are permanently removed.

Manage uplink bandwidth control

Uplink bandwidth control lets you check the maximum uplink bandwidth that your
Internet connection can support and specify the maximum uplink bandwidth.
To specify the maximum uplink bandwidth:
1. Open a web browser from a computer or mobile device that is connected to the
access point/router network.
2. Enter http://www.routerlogin.net in the address field.
If you are not connected to the access point/router network but to the same network
as the access point/router, enter the IP address that is assigned to the access
point/router. If you do not know the IP address, see Find the IP address of the access
point/router on page 29.
The Sign-In page displays. You are prompted to sign in with your NETGEAR account.
If the access point/router is not connected to the Internet, you are prompted to sign
in with the local login credentials (see Log in to the access point/router when it is
not connected to the Internet on page 28).
3. Click the Login button.
The NETGEAR Account Login page displays.
4. Enter your registered email address and password and click the LOG IN button.
The BASIC Home page displays.
5. Select ADVANCED > Setup > QoS Setup.
The QoS Setup page displays.
Optimize Performance 106 User Manual