Router Mode: Manage The Lan Ip Address Settings; Router Mode: Change The Access Point/Router Network Device Name - NETGEAR WAC124 User Manual

AC2000 802.11ac Wireless Access Point/Router WAC124
Router mode: Manage the LAN IP address
settings
If the access point/router is in router mode, the LAN subnet defines the LAN IP address
settings for the access point/router, including the IP address at which you can access
the access point/router over the local browser interface, the DHCP IP address settings,
and the Router Information Protocol (RIP) settings.
Note: The information in this section and subsections does not apply if the access
point/router is in access point mode.
Router mode: Change the access point/router network
device name
If the access point/router is in router mode, its default network device name is the model
number (WAC124).
This device name displays in, for example, a file manager when you browse your network.
To change the router network device name:
1. Open a web browser from a computer or mobile device that is connected to the
access point/router network.
2. Enter http://www.routerlogin.net in the address field.
If you are not connected to the access point/router network but to the same network
as the access point/router, enter the IP address that is assigned to the access
point/router. If you do not know the IP address, see Find the IP address of the access
point/router on page 29.
The Sign-In page displays. You are prompted to sign in with your NETGEAR account.
If the access point/router is not connected to the Internet, you are prompted to sign
in with the local login credentials (see Log in to the access point/router when it is
not connected to the Internet on page 28).
3. Click the Login button.
The NETGEAR Account Login page displays.
4. Enter your registered email address and password and click the LOG IN button.
The BASIC Home page displays.
5. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
Manage the Network Settings 112 User Manual