NETGEAR WAC124 User Manual page 146

AC2000 802.11ac Wireless Access Point/Router WAC124
(Continued)
Field
Serial Number
Operation mode
Field
LAN Port pane
To change these settings, see Use the Internet Setup Wizard on page 38 or Access point mode: Specify a fixed
LAN IP address on page 39
MAC Address
IP Address
Connection
IP Subnet Mask
Domain Name Server
Field
Wireless Settings (2.4GHz) or Wireless Settings (5GHz )
To change these settings, see Manage the Basic WiFi and Radio Features on page 61 and Manage the Advanced
WiFi and Radio Features on page 209.
Region
Channel
Mode
Wireless AP
Maintain and Monitor the Access
Point/Router
Description
The serial number of the access point/router. This number does not change.
AP
Description
The MAC address that applies to the access point/router WAN (Internet) port.
The LAN IP address that the access point/router receives from an existing router
in your network or the static (fixed) IP address that you manually configured.
The type of Internet connection that the access point/router uses, which can be
DHCP Client (the default setting) or FixedIP.
The IP subnet mask that the access point/router uses.
The IP address of the Domain Name System (DNS) server that the access
point/router uses.
Description
The country and region in which the access point/router is being used (see Set up
or change an open or secure WiFi network on page 62).
The channel that the radio uses (see Change the channel for a radio on page 211).
The WiFi throughput mode that the radio uses (see Change the WiFi throughput
mode for a radio band on page 212).
Whether the virtual access point (VAP) of the default WiFi network (Wireless 1) is
enabled or disabled (see Disable or enable a WiFi network on page 67).
146 User Manual