Router Mode: Disable Port Triggering - NETGEAR WAC124 User Manual

AC2000 802.11ac Wireless Access Point/Router WAC124
The port triggering settings display.
7. In the Port Triggering Time-out field, enter a value up to 9999 minutes.
The default setting is 20 minutes.
8. Click the Apply button.
Your settings are saved.

Router mode: Disable port triggering

By default, port triggering is enabled. You can disable port triggering temporarily
without removing any port triggering rules.
To disable port triggering:
1. Open a web browser from a computer or mobile device that is connected to the
access point/router network.
2. Enter http://www.routerlogin.net in the address field.
If you are not connected to the access point/router network but to the same network
as the access point/router, enter the IP address that is assigned to the access
point/router. If you do not know the IP address, see Find the IP address of the access
point/router on page 29.
The Sign-In page displays. You are prompted to sign in with your NETGEAR account.
If the access point/router is not connected to the Internet, you are prompted to sign
in with the local login credentials (see Log in to the access point/router when it is
not connected to the Internet on page 28).
3. Click the Login button.
The NETGEAR Account Login page displays.
4. Enter your registered email address and password and click the LOG IN button.
The BASIC Home page displays.
5. Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering page displays.
6. Select the Port Triggering radio button.
The port triggering settings display.
7. Select the Disable Port Triggering check box.
If this check box is selected, the access point/router does not apply port triggering
rules even if you specified them.
Router Mode: Manage Port
Forwarding and Port Triggering
236 User Manual