Connect A Wired Or Wifi Device To The Access Point/Router's Network After Installation; Connect To The Access Point/Router Through An Ethernet Cable - NETGEAR WAC124 User Manual

AC2000 802.11ac Wireless Access Point/Router WAC124
4. Enter your registered email address and password and click the LOG IN button.
The BASIC Home page displays.
5. Select ADVANCED > Administration > Set Password.
The Set Password page displays.
6. Select the Enable Password Recovery check box.
7. Select two security questions and provide answers to them.
8. Click the Apply button.
Your settings are saved.
Connect a wired or WiFi device to the access
point/router's network after installation
After you install the access point/router in your network (see Connect the access
point/router to your existing router and log in for the first time on page 17), you can
connect a device to the access point/router's LAN through an Ethernet cable or to the
access point/router's WiFi network over a WiFi connection.
If the device that you are trying to connect is set up to use a static IP address, change
the settings of your device so that it uses Dynamic Host Configuration Protocol (DHCP)
and can receive an IP address through or from the access point/router.
Note: Connecting to the access point/router's network is not the same as connecting
to the local browser interface to view or manage the access point/router's settings. For
information about logging in to the access point/router local browser interface, see Log
in to the access point/router when it is connected to the Internet on page 26 or Log in
to the access point/router when it is not connected to the Internet on page 28.
Connect to the access point/router through an Ethernet
cable
You can connect a computer or other LAN device to the access point/router using an
Ethernet cable and join the access point/router's local area network (LAN).
For information about logging in to the access point/router local browser interface, see
Log in to the access point/router when it is connected to the Internet on page 26or Log
in to the access point/router when it is connected to the Internet on page 26.
Install and Access the Access
Point/Router in Your Network
34 User Manual