View Or Clear The Logs - NETGEAR WAC104 User Manual

To change the traffic statistics polling frequency or stop polling:
1. Connect your computer or mobile device to the AP in one of the following ways:
• Connect directly to the AP's WiFi network or LAN.
• Connect to the same network that the AP is connected to.
2. Launch a web browser and enter http://www.aplogin.net (or aplogin.net) in the
address field.
Instead, if you are connected to same network as the AP, enter the LAN IP address
that is assigned to the AP. For information about finding the IP address, see Find the
IP address of the AP when you cannot use aplogin.net on page 24.
A login window displays.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The Home page displays.
4. Select Administration > Status.
The page displays the traffic statistics.
5. To change the polling frequency, do the following:
a. In the Poll Interval field, enter a time in seconds.
b. Click the Set Interval button.
6. To stop polling, click the Stop button.

View or clear the logs

You can view the log messages (in short, the logs) that are collected on the AP. These
logs might be useful if a technical support team helps you to resolve a problem. You
can also clear the logs.
To view or clear the logs:
1. Connect your computer or mobile device to the AP in one of the following ways:
• Connect directly to the AP's WiFi network or LAN.
• Connect to the same network that the AP is connected to.
2. Launch a web browser and enter http://www.aplogin.net (or aplogin.net) in the
address field.
Manage the AP and Monitor the
Traffic
802.11ac Wireless Access Point Model WAC104
66 User Manual