Setting The Cpu Threshold Notification Types And Values; Setting The Agent Contact And Location Information - Cisco IE-4000 Software Configuration Manual

Configuring SNMP
How to Configure SNMP
Command
8. snmp-server queue-length length
9. snmp-server trap-timeout seconds
10. end

Setting the CPU Threshold Notification Types and Values

Command
1. configure terminal
2. process cpu threshold type {total |
process | interrupt} rising percentage
interval seconds [falling fall-percentage
interval seconds]
3. end

Setting the Agent Contact and Location Information

Command
1. configure terminal
2. snmp-server contact text
3. snmp-server location text
4. end
Purpose
(Optional) Establishes the message queue length for each trap host. The
range is 1 to 1000; the default is 10.
(Optional) Defines how often to resend trap messages. The range is 1 to
1000; the default is 30 seconds.
Returns to privileged EXEC mode.
Purpose
Enters global configuration mode.
Sets the CPU threshold notification types and values:

total—Sets the notification type to total CPU utilization.

process—Sets the notification type to CPU process utilization.

interrupt—Sets the notification type to CPU interrupt utilization.

rising percentage—Specifies the percentage (1 to 100) of CPU
resources that, when exceeded for the configured interval, sends
a CPU threshold notification.

interval seconds—Specifies the duration of the CPU threshold
violation in seconds (5 to 86400) that, when met, sends a CPU
threshold notification.

falling fall-percentage—Specifies the percentage (1 to 100) of
CPU resources that, when usage falls below this level for the
configured interval, sends a CPU threshold notification.
This value must be equal to or less than the rising percentage
value. If not specified, the falling fall-percentage value is the
same as the rising percentage value.
Returns to privileged EXEC mode.
Purpose
Enters global configuration mode.
Sets the system contact string.
Sets the system location string.
Returns to privileged EXEC mode.
540