Cisco IE-4000 Software Configuration Manual page 496

Configuring LLDP, LLDP-MED, and Wired Location Service
How to Configure LLDP, LLDP-MED, and Wired Location Service
Configuring LLDP-MED TLVs
Command
1. configure terminal
2. interface interface-id
3. lldp med-tlv-select tlv
4. end
Configuring Network-Policy TLV
This task explains how to create a network-policy profile, configure the policy attributes, and apply it to an interface.
Command
1. configure terminal
2. network-policy profile profile number
3. {voice | voice-signaling} vlan [vlan-id
{cos cvalue | dscp dvalue}] | [[dot1p
{cos cvalue | dscp dvalue}] | none |
untagged]
4. exit
5. interface interface-id
6. network-policy profile number
7. lldp med-tlv-select network-policy
8. end
Purpose
Enters global configuration mode.
Specifies the interface on which you are configuring an LLDP-MED
TLV, and enters interface configuration mode.
Specifies the TLV to enable.
Returns to privileged EXEC mode.
Purpose
Enters global configuration mode.
Specifies the network-policy profile number, and enters
network-policy configuration mode. The range is 1 to 4294967295.
Configures the policy attributes:
voice—Specifies the voice application type.
voice-signaling—Specifies the voice-signaling application type.
vlan—Specifies the native VLAN for voice traffic.
vlan-id—(Optional) Specifies the VLAN for voice traffic. The range is
1 to 4096.
cos cvalue—(Optional) Specifies the Layer 2 priority class of service
(CoS) for the configured VLAN. The range is 0 to 7; the default is 0.
dscp dvalue—(Optional) Specifies the differentiated services code
point (DSCP) value for the configured VLAN. The range is 0 to 63; the
default is 0.
dot1p—(Optional) Configures the telephone to use IEEE 802.1p
priority tagging and use VLAN 0 (the native VLAN).
none—(Optional) Does not instruct the IP telephone about the voice
VLAN. The telephone uses the configuration from the telephone key
pad.
untagged—(Optional) Configures the telephone to send untagged
voice traffic. This is the default for the telephone.
Returns to global configuration mode.
Specifies the interface on which you are configuring a network-policy
profile, and enter interface configuration mode.
Specifies the network-policy profile number.
Specifies the network-policy TLV.
Returns to privileged EXEC mode.
492