Cisco IE-4000 Software Configuration Manual page 957

Industrial ethernet switch
Hide thumbs Also See for IE-4000:
Table of Contents

Advertisement

Configuring IPv6 Unicast Routing
Verifying Configuration
Verifying Configuration
Command
show bgp ipv6
show ipv6 access-list
show ipv6 cef
show ipv6 interface interface-id
show ipv6 mtu
show ipv6 neighbors
show ipv6 ospf
show ipv6 prefix-list
show ipv6 protocols
show ipv6 rip
show ipv6 route
show ipv6 routers
show ipv6 static
show ipv6 traffic
Command
show ipv6 eigrp [as-number] interface
show ipv6 eigrp [as-number] neighbor
show ipv6 eigrp [as-number] traffic
show ipv6 eigrp topology [as-number |
ipv6-address] [active | all-links | detail-links |
pending | summary | zero-successors]
Command
show ip http server history
show ip http server connection
show ip http client connection
show ip http client history
Configuration Example
This is an example of the output from the show ipv6 interface privileged EXEC command:
Switch# show ipv6 interface
Vlan1 is up, line protocol is up
Purpose
Display BGP IPv6 configuration and routing tables.
Display IPv6 access lists.
Display Cisco Express Forwarding for IPv6.
Display IPv6 interface status and configuration.
Display IPv6 MTU per destination cache.
Display IPv6 neighbor cache entries.
Display IPv6 OSPF information.
Display IPv6 prefix lists.
Display IPv6 routing protocols on the switch.
Display IPv6 RIP routing protocol status.
Display IPv6 route table entries.
Display local IPv6 routers.
Display IPv6 static routes.
Display IPv6 traffic statistics.
Purpose
Display information about interfaces configured for EIGRP IPv6.
Display the neighbors discovered by EIGRP IPv6.
Display the number of EIGRP IPv6 packets sent and received.
Display EIGRP entries in the IPv6 topology table.
Purpose
Display the previous 20 connections to the HTTP server, including the
IP address accessed and the time when the connection was closed.
Display the current connections to the HTTP server, including the local
and remote IP addresses being accessed.
Display the configuration values for HTTP client connections to HTTP
servers.
Display a list of the last 20 requests made by the HTTP client to the
server.
953

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ie-5000Ie-4010

Table of Contents