Cisco IE-4000 Software Configuration Manual page 498

Configuring LLDP, LLDP-MED, and Wired Location Service
Monitoring and Maintaining LLDP, LLDP-MED, and Wired Location Service
Monitoring and Maintaining LLDP, LLDP-MED, and Wired
Location Service
Command
clear lldp counters
clear lldp table
clear nmsp statistics
show lldp
show lldp entry entry-name
show lldp interface [interface-id]
show lldp neighbors [interface-id]
[detail]
show lldp traffic
show location admin-tag string
show location civic-location identifier
id
show location elin-location identifier id
show network-policy profile
show nmsp
Configuration Examples for Configuring LLDP, LLDP-MED, and
Wired Location Service
Enabling LLDP: Examples
This example shows how to globally enable LLDP:
Switch# configure terminal
Switch(config)# lldp run
Switch(config)# end
This example shows how to enable LLDP on an interface:
Switch# configure terminal
Switch(config)# interface GigabitEthernet1/17
Switch(config-if)# lldp transmit
Switch(config-if)# lldp receive
Switch(config-if)# end
Description
Resets the traffic counters to zero.
Deletes the LLDP neighbor information table.
Clears the NMSP statistic counters.
Displays global information, such as frequency of transmissions, the holdtime for
packets being sent, and the delay time before LLDP initializes on an interface.
Displays information about a specific neighbor.
You can enter an asterisk (*) to display all neighbors, or you can enter the
neighbor name.
Displays information about interfaces with LLDP enabled.
You can limit the display to a specific interface.
Displays information about neighbors, including device type, interface type and
number, holdtime settings, capabilities, and port ID.
You can limit the display to neighbors of a specific interface or expand the display
for more detailed information.
Displays LLDP counters, including the number of packets sent and received,
number of packets discarded, and number of unrecognized TLVs.
Displays the location information for the specified administrative tag or site.
Displays the location information for a specific global civic location.
Displays the location information for an emergency location.
Displays the configured network-policy profiles.
Displays the NMSP information.
494