Cisco IE-4000 Software Configuration Manual page 917

Configuring IP Unicast Routing
Configuring Protocol-Independent Features
Command
12. set dampening halflife reuse suppress
max-suppress-time
13. set local-preference value
14. set origin {igp | egp as | incomplete}
15. set as-path {tag | prepend as-path-string}
16. set level {level-1 | level-2 | level-1-2 |
stub-area | backbone}
17. set metric metric value
18. set metric bandwidth delay reliability loading mtu
19. set metric-type {type-1 | type-2}
20. set metric-type internal
21. set weight
22. end
23. show route-map
24. copy running-config startup-config
To delete an entry, use the no route-map map tag global configuration command or the no match or no set route-map
configuration commands.
Purpose
Set BGP route dampening factors.
Assign a value to a local BGP path.
Set the BGP origin code.
Modify the BGP autonomous system path.
Set the level for routes that are advertised into the
specified area of the routing domain. The
stub-area and backbone are OSPF NSSA and
backbone areas.
Set the metric value to give the redistributed
routes (for EIGRP only). The metric value is an
integer from -294967295 to 294967295.
Set the metric value to give the redistributed
routes (for EIGRP only):

bandwidth—Metric value or IGRP bandwidth of
the route in kilobits per second in the range 0
to 4294967295

delay—Route delay in tens of microseconds in
the range 0 to 4294967295.

reliability—Likelihood of successful packet
transmission expressed as a number between
0 and 255, where 255 means 100 percent
reliability and 0 means no reliability.

loading— Effective bandwidth of the route
expressed as a number from 0 to 255 (255 is
100 percent loading).

mtu—Minimum maximum transmission unit
(MTU) size of the route in bytes in the range 0
to 4294967295.
Set the OSPF external metric type for redistributed
routes.
Set the multi-exit discriminator (MED) value on
prefixes advertised to external BGP neighbor to
match the IGP metric of the next hop.
Set the BGP weight for the routing table. The value
can be from 1 to 65535.
Return to privileged EXEC mode.
Display all route maps configured or only the one
specified to verify configuration.
(Optional) Save your entries in the configuration
file.
913