Enabling A Partial Configuration - Cisco IE-4000 Software Configuration Manual

Industrial ethernet switch
Hide thumbs Also See for IE-4000:
Table of Contents

Advertisement

Configuring Cisco IOS Configuration Engine
Configuring Cisco IOS Agents
Command
14.
cns config initial {hostname | ip-address}
[port-number] [event] [no-persist] [page
page] [source ip-address] [syntax-check]
15.
end

Enabling a Partial Configuration

Command
1.
configure terminal
2.
cns config partial {ip-address | hostname}
[port-number] [source ip-address]
3.
end
Purpose
Enables the Cisco IOS agent and initiates an initial configuration.
{hostname | ip-address}—Enters the hostname or the
IP address of the configuration server.
(Optional) port-number—Enters the port number of the
configuration server. The default port number is 80.
(Optional) event—Enables configuration success, failure, or
warning messages when the configuration is finished.
(Optional) no-persist—Suppresses the automatic writing to
NVRAM of the configuration pulled as a result of entering the
cns config initial global configuration command. If the
no-persist keyword is not entered, using the cns config
initial command causes the resultant configuration to be
automatically written to NVRAM.
(Optional) page page—Enters the web page of the initial
configuration. The default is /Config/config/asp.
(Optional) source ip-address—Enters the source IP address.
(Optional) syntax-check—Checks the syntax when this
parameter is entered.
Note:
Though visible in the command-line help string, the
encrypt, status url, and inventory keywords are not
supported.
Returns to privileged EXEC mode.
Purpose
Enters global configuration mode.
Enables the configuration agent, and initiates a partial
configuration.
{ip-address | hostname}—Enters the IP address or the
hostname of the configuration server.
(Optional) port-number—Enters the port number of the
configuration server. The default port number is 80.
(Optional) source ip-address—Enters the source IP
address.
Note:
Though visible in the command-line help string, the
encrypt keyword is not supported.
Returns to privileged EXEC mode.
88

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ie-5000Ie-4010

Table of Contents