Ip Filter Commands; Management; Table 4-11 Ip Filter Commands - SMC Networks SMC8126L2 Management Manual

• password - password for this privilege level.
(Maximum length: 8 characters plain text, 32 encrypted, case sensitive)
Default Setting
• The default is level 15.
• The default password is "super"
Command Mode
Global Configuration
Command Usage
• You cannot set a null password. You will have to enter a password to change
the command mode from Normal Exec to Privileged Exec with the enable
command (page 4-19).
• The encrypted password is required for compatibility with legacy password
settings (i.e., plain text or encrypted) when reading the configuration file
during system bootup or when downloading the configuration file from a TFTP
server. There is no need for you to manually configure encrypted passwords.
Example
Console(config)#enable password level 15 0 admin
Console(config)#
Related Commands
enable (4-19)
authentication enable (4-72)

IP Filter Commands

Command

management

show management
management
This command specifies the client IP addresses that are allowed management
access to the switch through various protocols. Use the no form to restore the
default setting.
Syntax
[no] management {all-client | http-client | snmp-client | telnet-client}
start-address [end-address]
• all-client - Adds IP address(es) to the SNMP, web and Telnet groups.
• http-client - Adds IP address(es) to the web group.
• snmp-client - Adds IP address(es) to the SNMP group.

Table 4-11 IP Filter Commands

Function
Configures IP addresses that are allowed management access GC
Displays the switch to be monitored or configured from a
browser
System Management Commands
4
Mode Page
4-27
PE 4-28
4-27