Showing Commands - SMC Networks SMC8126L2 Management Manual

4
Command Line Interface

Showing Commands

If you enter a "?" at the command prompt, the system will display the first level of
keywords for the current command class (Normal Exec or Privileged Exec) or
configuration class (Global, ACL, Interface, Line or VLAN Database). You can also
display a list of valid keywords for a specific command. For example, the command
"show ?" displays a list of possible show commands:
Console#show ?
access-group
access-list
bridge-ext
calendar
dot1x
garp
gvrp
history
interfaces
ip
lacp
line
log
logging
mac-address-table
management
map
port
public-key
queue
radius-server
running-config
snmp
sntp
spanning-tree
ssh
startup-config
system
tacacs-server
users
version
vlan
Console#show
The command "show interfaces ?" will display the following information:
Console#show interfaces ?
counters
status
switchport
Console#show interfaces
4-4
Access groups
Access lists
Bridge extension information
Date and time information
802.1x content
GARP properties
GVRP interface information
History information
Interface information
IP information
LACP statistics
TTY line information
Login records
Login setting
Configuration of the address table
Management IP filter
Maps priority
Port characteristics
Public key information
Priority queue information
RADIUS server information
Information on the running configuration
Simple Network Management Protocol statistics
Simple Network Time Protocol configuration
Spanning-tree configuration
Secure shell server connections
Startup system configuration
System information
TACACS server settings
Information about terminal lines
System hardware and software versions
Virtual LAN settings
Interface counters information
Interface status information
Interface switchport information