Spanning-Tree Transmission-Limit; Spanning-Tree Mst-Configuration - SMC Networks SMC8126L2 Management Manual

4
Command Line Interface

spanning-tree transmission-limit

This command configures the minimum interval between the transmission of
consecutive RSTP/MSTP BPDUs. Use the no form to restore the default.
Syntax
spanning-tree transmission-limit count
no spanning-tree transmission-limit
count - The transmission limit in seconds. (Range: 1-10)
Default Setting
3
Command Mode
Global Configuration
Command Usage
This command limits the maximum transmission rate for BPDUs.
Example
Console(config)#spanning-tree transmission-limit 4
Console(config)#

spanning-tree mst-configuration

This command changes to Multiple Spanning Tree (MST) configuration mode.
Default Setting
• No VLANs are mapped to any MST instance.
• The region name is set the switch's MAC address.
Command Mode
Global Configuration
Example
Console(config)#spanning-tree mst-configuration
Console(config-mstp)#
Related Commands
mst vlan (4-151)
mst priority (4-151)
name (4-152)
revision (4-153)
max-hops (4-153)
4-150