Example
Console#show management all-client
Management IP Filter
HTTP-Client:
Start IP address
-----------------------------------------------
1. 192.168.1.19
2. 192.168.1.25
SNMP-Client:
Start IP address
-----------------------------------------------
1. 192.168.1.19
2. 192.168.1.25
TELNET-Client:
Start IP address
-----------------------------------------------
1. 192.168.1.19
2. 192.168.1.25
Console#
Web Server Commands
Command
ip http port
ip http server
ip http secure-server
ip http secure-port
ip http port
This command specifies the TCP port number used by the web browser interface.
Use the no form to use the default port.
Syntax
ip http port port-number
no ip http port
port-number - The TCP port to be used by the browser interface.
(Range: 1-65535)
Default Setting
80
Command Mode
Global Configuration
End IP address
192.168.1.19
192.168.1.30
End IP address
192.168.1.19
192.168.1.30
End IP address
192.168.1.19
192.168.1.30
Table 4-12 Web Server Commands
Function
Specifies the port to be used by the web browser interface
Allows the switch to be monitored or configured from a browser GC
Enables HTTPS for encrypted communications
Specifies the UDP port number for HTTPS
System Management Commands
4
Mode
Page
GC
4-29
4-30
GC
4-30
GC
4-31
4-29