Ip Filter Commands; Table 4-11 Ip Filter Commands - SMC Networks 6152L2 - annexe 1 Management Manual

• The encrypted password is required for compatibility with legacy
password settings (i.e., plain text or encrypted) when reading the
configuration file during system bootup or when downloading the
configuration file from a TFTP server. There is no need for you to
manually configure encrypted passwords.
Example
Console(config)#enable password level 15 0 admin
Console(config)#
Related Commands
enable (4-27)
authentication enable (4-93)

IP Filter Commands

Command
management
show management Displays the switch to be monitored or
management
This command specifies the client IP addresses that are allowed
management access to the switch through various protocols. Use the no
form to restore the default setting.
Syntax
[no] management {all-client | http-client | snmp-client |
telnet-client} start-address [end-address]
• all-client - Adds IP address(es) to the SNMP, web and Telnet
groups.
• http-client - Adds IP address(es) to the web group.
• snmp-client - Adds IP address(es) to the SNMP group.
• telnet-client - Adds IP address(es) to the Telnet group.
• start-address - A single IP address, or the starting address of a range.

Table 4-11 IP Filter Commands

Function
Configures IP addresses that are allowed
management access
configured from a browser
S M
YSTEM ANAGEMENT
C
OMMANDS
Mode Page
GC 4-37
PE 4-38
4-37