Table 4-58 Mode - SMC Networks SMC8126L2 Management Manual

CLI – This example sets the 802.1X parameters on port 2. For a description of the
additional fields displayed in this example, see "show dot1x" on page 4-86.
Console(config)#interface ethernet 1/2
Console(config-if)#dot1x port-control auto
Console(config-if)#dot1x re-authentication
Console(config-if)#dot1x max-req 5
Console(config-if)#dot1x timeout quiet-period 30
Console(config-if)#dot1x timeout re-authperiod 1800
Console(config-if)#dot1x timeout tx-period 40
Console(config-if)#exit
Console(config)#exit
Console#show dot1x
Global 802.1X Parameters
system-auth-control: enable
802.1X Port Summary
Port Name Status
1/1 disabled
1/2 enabled
. .
.
1/26 disabled
802.1X Port Details
802.1X is disabled on port 1/1
802.1X is enabled on port 1/2
reauth-enabled: Enable
reauth-period:
quiet-period:
tx-period:
supplicant-timeout:
server-timeout: 10
reauth-max:
max-req:
Status
Operation mode
Max count
Port-control
Supplicant
Current Identifier
Authenticator State Machine
State
Reauth Count
Backend State Machine
State
Request Count
Identifier(Server)
Reauthentication State Machine
State
. .
. 802.1X is disabled on port 1/26
Console#
Operation Mode
Single-Host
Single-Host
Single-Host
1800
30
40
30
2
5
Authorized
Single-Host
5
Auto
00-12-CF-49-5e-dc
3
Authenticated
0
Idle
0
2
Initialize
User Authentication
Mode
ForceAuthorized
auto
ForceAuthorized
3
4-116
4-82
4-84
4-82
4-84
4-85
4-85
4-86
Authorized
n/a
yes
n/a
3-65