Enabling Snmp Agent Status; Figure 3-25 Configuring Ip Trap Managers; Figure 3-26 Enabling Snmp Agent Status - SMC Networks SMC8126L2 Management Manual

Web – Click SNMP, Configuration. Fill in the IP address and community string for
each trap manager that will receive trap messages, and then click Add. Select the
trap types required using the check boxes for Authentication and Link-up/down
traps, and then click Apply.
CLI – This example adds a trap manager and enables both authentication and
link-up, link-down traps.
Console(config)#snmp-server host 192.168.1.19 private version 2c
Console(config)#snmp-server enable traps

Enabling SNMP Agent Status

Enables SNMPv3 service for all management clients (i.e., versions 1, 2c, 3).
Command Attributes
• SNMP Agent Status – Check the box to enable or disable the SNMP Agent.
Web – Click SNMP, Agent Status.

Figure 3-25 Configuring IP Trap Managers

Figure 3-26 Enabling SNMP Agent Status

Simple Network Management Protocol
3
4-104
4-106
3-35