Siemens SIPROTEC 7UT613 series Manual page 629

Project
Protection devices
Reorganizing
RIO file
RSxxx-interface
SCADA Interface
Service port
Setting parameters
SI
SI_F
SICAM SAS
SICAM SC
SICAM WinCC
Single command
Single point indica-
tion
SIPROTEC
7UT613/63x Manual
C53000-G1176-C160-2
Content-wise, a project is the image of a real power supply system. Graphically, a
project is represented as a number of objects which are integrated in a hierarchical
structure. Physically, a project consists of a number of directories and files containing
project data.
All devices with a protective function and no control display.
Frequent addition and deletion of objects results in memory areas that can no longer
be used. By reorganizing projects, you can release these memory areas again. How-
ever, a cleanup also reassigns the VD addresses. The consequence is that all SIPRO-
TEC 4 devices have to be reinitialized.
Relay data Interchange format by Omicron.
Serial interfaces RS232, RS422/485
Rear serial interface on the devices for connecting to a control system via IEC or
PROFIBUS.
Rear serial interface on the devices for connecting DIGSI (for example, via modem).
General term for all adjustments made to the device. Parameterization jobs are exe-
cuted by means of DIGSI or, in some cases, directly on the device.
→ Single point indication
→ Single point indication transient → Transient information, → Single point indication
Modularly structured station control system, based on the substation controller →
SICAM SC and the SICAM WinCC operator control and monitoring system.
Substation Controller. Modularly structured substation control system, based on the
SIMATIC M7 automation system.
The SICAM WinCC operator control and monitoring system displays the state of your
network graphically, visualizes alarms, interrupts and indications, archives the network
data, offers the possibility of intervening manually in the process and manages the
system rights of the individual employee.
Single commands are process outputs which indicate 2 process states (for example,
ON/OFF) at one output.
Single indications are items of process information which indicate 2 process states (for
example, ON/OFF) at one output.
The registered trademark SIPROTEC is used for devices implemented on system
base V4.
Glossary
629