Siemens SIPROTEC 7UT613 series Manual page 387

Message
„O/C Ph3 Not av." 209.2491 Time overcurrent protection for phase currents 3 is not available for
„O/C Ph3 err Set" 209.2493 Settings for time overcurrent protection for phase currents 3 not plau-
O/C 3I0 not av. 1861
„O/C 3I0 error" 191.2493 Settings for time overcurrent protection for zero sequence current not
„O/C 3I0-2 n/a" 321.2491 Time overcurrent protection for zero sequence current 2 is not avail-
„O/C3I0-2 errSet" 321.2493 Settings for time overcurrent protection 2 for zero sequence current
„O/C 3I0-3 n/a" 323.2491 Time overcurrent protection for zero sequence current 3 is not avail-
„O/C3I0-3 errSet" 323.2493 Settings for time overcurrent protection 3 for zero sequence current
O/C 3I0 Err CT 1862
„O/C E error" 024.2493 Settings for time overcurrent protection for earth current not plausible 2.5
„O/C E2 ErrCT" 325.2492 No assignment possible for time overcurrent protection for earth
„O/C E2 err. Set" 325.2493 Settings for time overcurrent protection for earth current 2 not plausi-
O/C1ph Err CT 5981
„O/C 1Ph err Set" 200.2493 Settings for single-phase time overcurrent protection is not plausible 2.7
„I2 Not avail." 5172
„I2 Adap.fact." 5168
„I2 error set." 5180
O/L No Th.meas. 1545
O/L not avail. 1549
O/L Adapt.fact. 1546
„O/L2 err. Set." 204.2493 Settings for overload protection 2 setting not plausible
„O/L2 No Th.meas" 204.2609 Temperature reception for overload protection 2 is missing (from RTD
„O/L2 Not avail." 204.2491 Overload protection 2 is not available for the configured protective
„O/L2 Adap.fact." 204.2494 The matching factor of the current transformers for overload protec-
„O/L set wrong" 044.2493 Overload protection setting not plausible
„U/f Not avail." 5377
„U/f Err No VT" 5376
„U/f err. Set." 5378
„U< err. Obj." 033.2491 Undervoltage protection is not available for the configured protected
7UT613/63x Manual
C53000-G1176-C160-2
No
the configured protected object
sible
Time overcurrent protection for zero current is not available for the
configured protected object
plausible
able for the configured protected object
not plausible
able for the configured protected object
not plausible
No assignment possible for time overcurrent protection for earth
current
current 2
ble
No assignment possible for single-phase time overcurrent protection 2.1.4
Unbalanced load protection is not available for the configured pro-
tected object
The matching factor of the current transformers for unbalanced load
protection is too great or too small
Unbalanced load protection setting not plausible
Temperature reception for overload protection is missing (from RTD
box)
Overload protection is not available for the configured protected
object
The matching factor of the current transformers for overload protec-
tion is too great or too small
box)
object
tion 2 is too great or too small
Overexcitation protection is not available for the configured protected
object
Overexcitation protection is not available without voltage connection 2.1.4
Overexcitation protection setting not plausible
object
Meaning
3.3 Commissioning
see
Section
2.1.42.1.6
2.4.2
2.1.4
2.4.2
2.1.42.1.6
2.4.2
2.1.42.1.6
2.4.2
2.1.4
2.1.42.1.6
2.5
2.1.4
2.8
2.8
2.1.3
2.9.5
2.1.4
2.1.4
2.9
2.9
2.9
2.9
2.9
2.9
2.1.4
2.11
2.14
387