Changing Procedure Of The Sewing Pattern; Confirming The Pattern Shape - JUKI MEB-3200 Instruction Manual

(9) Changing procedure of the sewing pattern

(10) Confirming the pattern shape
20
1) Make sure that sewing LED
(When the LED lights up, press [READY
to make it go out.)
2) Press [PATTERN
No.
3) Press [LEFT ] key
select the pattern you desire to sew.
(The number of pattern which is not registered is
not displayed.)
4) Press [READY ] key
and to make it possible to sew.
1) Press [READY ] key
and to make it possible to sew.
2) Lower the presser with the presser switch.
3) Every time [FORWARD
key is pressed, the feed mechanism travels
forward/backward stitch by stitch and continually
moves up to the position of the sewing end.
In addition, the feed mechanism continually
travels when keeping the key held pressed.
4) After completing the confirmation of the sewing
pattern, press [RESET
machine to its set position.
If the START switch is pressed during
confirmation of the pattern shape, sewing
starts from the position where the switch is
pressed. So,be careful.
goes out.
]
] key to display the pattern
or [LEFT ] key
to light up sewing LED
to light up sewing LED
] key or [BACK
] key to return the
key
to
]