How To Use The Various Functions; Performing Procedure Of The Cycle Sewing - JUKI MEB-3200 Instruction Manual

10. HOW TO USE THE VARIOUS FUNCTIONS

(1) Performing procedure of the cycle sewing

• When [READY
after the step will be deleted.
• When changing the cycle sewing without pressing [READY
data is not stored in memory.
When you desire to return the pattern to the previous one or to skip to the next one at the time of stop of the
sewing machine during sewing, press [LEFT
presser goes up.) Display of the pattern No. changes.
When the data is changed with each pattern, the contents registered in C1 to C3 also change.
So, be careful.
Example of display
Step 1 and pattern No. 11 of cycle sewing 1 (C1)
Program No. :
] key is pressed with the display of pattern No. [ ] [ ] (no light-up), the pattern
] key
Cycle sewing Step
C1 to C3 1 to 9
For the cycle sewing, three programs, C1
to C3, can be registered and maximum 15
different kinds of patterns (1 to 15 steps)
in the respective programs can be sewn in
order. (Set the data with individual patterns
in advance before resgistration.)
1) Make sure that sewing LED
When it lights up, press [READY
make it go out.
2) Press [PATTERN ] key
No.
3) Press [LEFT ] key
the program No. desired to register. (C1 to C3)
4) Press [DATA ] key
5) Press [LEFT ] key
display the step of cycle sewing.
6) Press [RIGHT ] key
set the individual pattern No.
7) Repeat the steps 5) to 6) and when the setting is
completed, display the next step and make the
display of individual pattern No. [ ][ ] (no light-up).
Then press [READY
LED and the program is stored in memory.
] key or turning OFF the power, the
or [LEFT ] key . (It is effective only when the
Individual pattern No.
1 to 99
A,b,C,d,E,F
has gone out.
] key to
to display the pattern
or [LEFT ] key to select
.
or [LEFT ] key to
or [RIGHT ] key to
] key to light up sewing
39