Adjustment Of Each Part; Replacing The Cloth Cutting Knife And The Knife Holder - JUKI MEB-3200 Instruction Manual

8. ADJUSTMENT OF EACH PART

WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.

(1) Replacing the cloth cutting knife and the knife holder

When replacing the cloth cutting knife, match the knife No. to the knife No. of the program. Use the
cloth cutting knife and the knife holder as a set.
(Two different knife marks are formed and cloth cannot be precisely cut. As a result, breakage of the
cloth cutting knife will be caused.)
26
■ Replacing the upper cloth cutting
knife and the knife holder
1) Loosen thumbscrew
and cloth cutting knife
2) Make the knife holder or the cloth cutting knife
desired to be replaced come in contact with
stopper and tighten thumbscrew
Stopper is for positioning. Do not move it.
■ Lower cloth cutting knife and the
knife holder
1) Loosen setscrew
cloth cutting knife
2) Make the knife holder or the cloth cutting knife
desired to be changed come in contact with
stopper and tighten setscrew
Stopper is for positioning. Do not loosen
screw .
and remove knife holder
.
.
and remove knife holder and
.
.