JUKI MEB-3200 Instruction Manual page 10

Temporary stop
switch
The label gives
Press this switch
t h e m i n i m u m
to stop the sewing
precautions to
machine when you
be taken when
need to stop it while
o p e r a t i n g t h e
it is in operation.
sewing machine.
Eye protection cover
T h i s i s a c o v e r f o r
protecting eyes from
being injured by a bro-
ken needle.
Finger guard
This is a cover for
preventing contact
between fingers
and the needle.
Power switch
This is a switch for disconnecting
the power unit of the sewing ma-
chine from the power supply.
Power switch (EU type)
T h i s s w i t c h i s u s e d
for disconnecting the
power unit of the sew-
ing machine from the
power supply. It is also
used as the emergency
stop switch.
Close/open caution label
Cautions when closing/opening the sewing
machine are described.
In addition, be aware that the safety devices such as the "eye protection cover" and "finger guard" are some-
times omitted in the sketches, illustrations and figures included in the Instruction Manual for the explanation's
sake. In the practical use, never remove those safety devices.
Safety devices and warning labels
Warning label
(Refer
to the
warning
label on
page i.)
Voltage indication seal
T h e f a c t o r y - s e t
voltage at the time
of shipment is de-
scribed on this seal.
• When returning the
machine head to its
home position, do not
return it with tools such
as screwdriver and
the like placed in the
bottom cover.
• When raising the
machine head, be
careful not to damage
the gas spring
with tools such as
screwdriver and the
like.
Needle bar cover
This is a cover for
preventing contact
b e t w e e n t h e h u -
man body and the
needle bar.
CAUTION
vii
Turning gear cover
Cover to prevent human
b o d y f r o m c o m i n g i n
contact with turning gear.
Hinge stopper
Component to prevent
human body from being
injured by the sewing
machine which can drop
when being raised from
its home position for
maintenance.
Electrical-
shock danger
label
(Refer to
In order to pro-
t e c t a g a i n s t
e l e c t r i c a l
shock, safety
(EU type)
p r e c a u t i o n s
label" on
to be taken to
avoid danger
are written on
this label.
Threading diagram seal
Order of threading is
described.
Oiling place seal
Oiling places are de-
scribed.
Gas spring
Component to ensure
safety when raising/
returning the sewing
machine from/to its
home position.
"Elec-
trical-
shock
danger
page i.)