Left Side Of The Bridge Unit - Epson WF-C20590 Installation Manual

WF-C20590 Installation Guide
4. Place the Cable Cover over the relay cables, then insert the dowel of the Cable
Cover into the plate and attach it with the two hooks.

Left Side of The Bridge Unit

Relay Cable
There is a mounting hole and dowel on both the center and
C H E C K
P O I N T front side of the Finisher Unit.
When attaching the Grounding Plate in the following step,
install it only to the center of the Finisher Unit.
5.
Cable Cover
Dowel
Hook
PRELIMINARY
Installing the Optional Units
Place the B Positioning Hole on the Grounding Plate over the dowel on the center
of the lower right side of the Finisher Unit. Then attach the Grounding Plate with
one screw (S16: ).
No. Screw types
S16 C.B.SCREW, 4X8, F/ZN-3C
Finisher Unit
Grounding plate
attaching position
Dowel
B Positioning Hole
Grounding
Plate
46