Epson WF-C20590 Installation Manual page 58

WF-C20590 Installation Guide
12. Release the hook to remove the small cover on the back of the printer.
13. Connect the High-Capacity Input Tray Cable Connector to the printer.
Lower back right
Small cover
Hook
Printer
High-Capacity Input Tray
Cable Connector
PRELIMINARY
Installing the Optional Units
ADJUSTING THE HIGH-CAPACITY INPUT TRAY FOR LETTER SIZE
After installing the High-Capacity Input Tray, you must adjust the unit to
support letter-size paper instead of A4-size paper. Keep the removed parts if
you want to switch back to A4 size.
1. Open the unit.
2. Remove one screw, then remove the Paper Rear Edge Regulation Board.
Remove the screw
Paper Rear Edge
Regulation Board
56