Adjusting The Right (Printer Side) Casters; Parallel Adjustment - Epson WF-C20590 Installation Manual

WF-C20590 Installation Guide
ADJUSTING THE RIGHT (PRINTER SIDE) CASTERS – REQUIRED FOR
CASE 2
31. Turn the Fixing Nut of the casters on the right (printer side) clockwise to loosen it.
Turn the Adjustment Nut counterclockwise to raise the caster until it can be
rotated by hand. Keep the Fixing Nut loosened until the next step.
Casters to adjust
PARALLEL ADJUSTMENT – REQUIRED FOR
32. Perform the parallel adjustment with the casters on the left (Finisher Unit side).
Casters to adjust
Make sure the
casters can be
rotated by hand
after making
adjustments.
C H E C K
P O I N T
PRELIMINARY
Installing the Optional Units
To correct the tilt of the Bridge Unit, adjust the height of the
left side casters on the Bridge Unit.
CASE 1 AND CASE 2
Make sure the
magnet at both ends
of the EJ Cover
stick to the plate.
40