WF-C20590 Installation Guide
Installation Notes
When installing or moving the printer and its options, pay attention to the
following points.
Since the printer, Bridge Unit, and Finisher Unit are
heavy, be careful not to let them fall over during
movement.
When moving the printer, Bridge Unit, and Finisher Unit,
place your hands in the areas indicated below; otherwise,
damage to the exterior, frames, or moving parts may
occur.
Position where hands should be placed on the printer body
Front side
Do NOT place hands here
Back side
Place hands here when moving
the unit
PRELIMINARY
Site Preparation
Position where hands should be placed on the Bridge Unit
Front side
Back side
Position where hands should be placed on the Finisher Unit
Do NOT place hands
here
Place hands here
when moving the unit
Place hands here, but
use caution
Place hands as close to the center of the
Finisher Unit as possible.
Do NOT place hands here
Place hands here when moving the unit
3