An Image Of The Reverse Side Of The Original Appears In The Copied Image; The Position, Size, Or Margins Of The Printout Are Incorrect; Paper Is Smeared Or Scuffed - Epson EcoTank ET-2500 User Manual

User's Guide
❏ Do not press too hard on the original or the document cover when you are placing the originals on the scanner
glass. Uneven colors, smears, or dots may appear when the original or the document cover is pressed too hard.
❏ If a moiré (cross-hatch) pattern appears, place the original at a slightly different angle.
Related Information
"Cleaning the Paper Path for Ink Smears" on page 60
&
"Cleaning the Scanner Glass" on page 61
&
"Print Quality Is Poor" on page 81
&
An Image of the Reverse Side of the Original Appears in the Copied
Image
For a thin original, place the original on the scanner glass and then place a piece of black paper over it.

The Position, Size, or Margins of the Printout Are Incorrect

❏ Load paper in the correct direction, and slide the edge guide against the edges of the paper.
❏ When placing the originals on the scanner glass, align the corner of the original with the corner indicated by a
symbol on the frame of the scanner glass. If the edges of the copy are cropped off, move the original slightly
away from the corner.
❏ Clean the scanner glass and the document cover. If there is dust or stains on the glass, the copy area may extend
to include the dust or stains, resulting in the wrong printing position or small images.
❏ Select the appropriate paper size setting in the printer driver.
❏ Adjust the margin setting in the application so that it falls within the printable area.
Related Information
"Loading Paper in the Rear Paper Feed" on page 19
&
"Placing Originals on the Scanner Glass" on page 22
&
"Cleaning the Scanner Glass" on page 61
&
"Printable Area" on page 90
&

Paper Is Smeared or Scuffed

Check the following if the paper is smeared or scuffed when printing.
❏ Clean the paper path.
❏ Clean the scanner glass and the document cover.
❏ Load paper in the correct direction.
❏ When performing manual 2-sided printing, make sure that the ink is completely dry before reloading the paper.
Related Information
"Cleaning the Paper Path for Ink Smears" on page 60
&
"Cleaning the Scanner Glass" on page 61
&
"Loading Paper in the Rear Paper Feed" on page 19
&
Solving Problems
83